Manuals / Brands / Computer Equipment / Computer Monitor / Epson / Computer Equipment / Computer Monitor

Epson S1C33 A.3 Connecting the System, Connecting to a personal computer, Connecting to the S5U1C33xxxDx board/user target board

1 30

Download 30 pages, 203.69 Kb

APPENDIX S5U1C330MXD1 BOARD

A.3 Connecting the System

Note: When connecting and disconnecting the system, make sure to turn off the power of the S5U1C33xxxDx/ target board and the personal computer.

Connecting to the S5U1C33xxxDx board/user target board

S5U1C33xxxDx/target board I/F connector

S5U1C33xxxDx

The S5U1C33xxxDx board has a connector used for connecting with the S5U1C330MxD1. Connect the S5U1C330MxD1 to the S5U1C33xxxDx board with the S5U1C33xxxDx/target board I/F connector.

S5U1C330MxD1 I/F connector

Figure A.3.1 Connecting to the S5U1C33xxxDx board

S5U1C33xxxDx/target board I/F connector

User target board

VCC

SINx SOUTx SCLKx

#RESET

#NMI

(K63) VSS

S1C33xxx

S5U1C330MxD1 I/F connector

(supplied with the S5U1C330MxD1 package)

Figure A.3.2 Connecting to the user target board

When connecting to the user target board, attach the S5U1C330MxD1 I/F connector (supplied with the S5U1C330MxD1 package) to the target board. See Table A.2.1 for the pin layout of the S5U1C33xxxDx/target board I/F connector.

Connecting to a personal computer

Connect the S5U1C330MxD1 board to the COMx port connector (the port used for debugging) of the personal computer with the RS232C cable supplied with the S5U1C330MxD1 package.

S5U1C33xxxDx/	RS232C cable
target board	(supplied with the S5U1C330MxD1 package)

COMx

(male) (female)

EPSON

RS232C connector (female)

Figure A.3.3 Connecting to a personal computer

16	EPSON	S1C33 FAMILY DEBUG MONITOR
		OPERATION MANUAL

Contents

Page © SEIKO EPSON CORPORATION 2001 All rights reserved Devices Development tools S1C33 Family processors Development tools for the S1C33 Family Page TABLE OF CONTENTS Preface Table of Contents 1 S5U1C330M2S Package 2 Implementing the Debug Starting Up and Terminating Procedure of Debugging Page 1 S5U1C330M2S Package 1.1 Features 1.2 Components of S5U1C330M2S Package 1.3 Installation src dmt33xxx 2 Implementing the Debug Monitor 2.1 Resources Required for the Debug Monitor 2.2 Starting Up the Debug Monitor 2.3 Building an Application Program 2.4 Creating Communication Control Routines (2) void m_snd_1byte(unsigned char) Example: m_snd_1byte( ) of "m3s_sci.s (3) unsigned char m_rcv_1byte( ) 0:received normally 1:framing error (4) void m_dummy_rd( ) Example: m_dummy_rd( ) of "m3s_sci.s (5) void m_ver_rd( ) Example: m_ver_rd( ) of "m3s_sci.s (6) Sample command file for building 3 Target Program and Debugging 3.1 Notes for Creating Target Programs 3.2 Parameter File for Debugging 3.3 Starting Up and Terminating Procedure of Debugging 3.4 Debugging Method 3. Debugging in the Flash memory Notes 3.5 Precautions for Debugging Appendix S5U1C330MxD1 Board A.1 Outline of S5U1C330MxD1 Board A.2 Names and Functions of Each Part A.3 Connecting the System A.4 S5U1C330MxD1 Block Diagram A.5 Program Debugging with a S5U1C33xxxDx Board and S5U1C330M2S Building the sample program Starting up the debug monitor Debugging in the RAM Debugging in the Flash memory Forced break Notes on debugging the user program on the S5U1C33104Dx/S5U1C33209Dx board A.6 Indispensable Signal Pins of S5U1C330MxD1 International Sales Operations AMERICA EPSON ELECTRONICS AMERICA, INC - HEADQUARTERS - SALES OFFICES - West In pursuit of “Saving” Technology, Epson electronic devices Our lineup of semiconductors, liquid crystal displays and quartz devices assists in creating the products of our customers’ dreams Debug Monitor Operation Manual