7.When you see this screen, select a zoom rate (display size), and then press Enter.
note
The default setting for the Startup Screen option menu is ON. If the Startup Screen is set to OFF, the logo will not display at startup.
If the User’s Logo Protect function has been set to ON, the Display Background setting cannot be changed. You need to turn the protect function off first. See
page 69 for details.
Once you’ve saved a user’s logo, you cannot reset the logo setting to its factory default (no logo).
8.When you see the message Save image as user’s logo?, select Yes and press Enter. Saving the logo takes a few moments. Do not use the projector or other sources (computer, video, etc.) while the logo is being saved.
9.When you see the message Completed, press Esc.
10.To display the logo as the background screen when the A/V Mute button is pressed, select the Extended menu and press Enter.
11.Select Display and press Enter.
12.Select Display Background and press Enter. Then select Logo and press Enter.
13.When you’re finished, press Menu to exit the menus.
1.Press the Freeze button on the remote control for about 7 seconds until you see the Password Protect menu:
note
If a password has already been set, you see the Password Protect Release screen. See “Starting the Projector with a Password” on page 70.
68