Power | Lamp | Temperature |
|
light | light | light | Description |
|
|
|
|
Flashing | Flashing | Flashing red | There is an internal error in the projector. Turn the projector |
red | red |
| off and unplug it. Contact Epson for help. See page 93. |
|
|
|
|
Red | Off | Flashing red | There is a problem with the fan or a sensor. Clean the air |
|
|
| filter and air vents. See page 75. |
|
|
| If this does not solve the problem, turn the projector off and |
|
|
| unplug it. Contact Epson for help. See page 93. |
|
|
|
|
— | Flashing | Off | Replace the lamp with a new one as soon as possible; see |
| orange |
| page 76 for instructions. If you continue to use the lamp, |
|
|
| there is a risk it may break. |
|
|
|
|
Red | Flashing | Off | The lamp is burned out, broken, or not installed correctly; or |
| red |
| the lamp cover is open. Close the cover or replace or reseat |
|
|
| the lamp, if necessary, as described on page 76. Also, clean |
|
|
| the air filter and air vents. See page 75. |
|
|
| If you are using the projector at an altitude above 4900 ft |
|
|
| (1500 m), turn on High Altitude mode as the Operation |
|
|
| setting in the Extended menu; see page 64. If these |
|
|
| suggestions don’t work, contact Epson. |
|
|
|
|
Red | Off | Red | The projector has overheated and turned itself off. Let it |
|
|
| cool for about five minutes, then turn it back on. Make sure |
|
|
| there is plenty of space around and under the projector for |
|
|
| ventilation. Also clean the air filter and air vents. See |
|
|
| page 75. If it continues to overheat, you may need to |
|
|
| replace the air filter. |
|
|
|
|
Red | Off | Flashing | The projector is too hot. Make sure the temperature |
|
| orange | surrounding the projector does not exceed 95 °F (35 °C) and |
|
|
| there is plenty of space around and under the projector for |
|
|
| ventilation. Clean the air filter and air vents, if necessary. |
|
|
| See page 75 for instructions. |
|
|
|
|
Flashing | Off | Off | The projector is shutting down. Wait for the light to stop |
orange |
|
| flashing and remain orange before unplugging it. |
|
|
|
|
Orange | Off | Off | The projector is in standby or sleep mode. You can unplug it |
|
|
| or press the P Power button to turn it on. |
|
|
|
|
Flashing | Off | Off | The projector is warming up. Wait for the image to appear. |
green |
|
|
|
|
|
|
|
Green | Off | Off | The projector is operating normally. |
|
|
|
|
84Solving Problems