EPSON Stylus® Pro 4000

Start Here

Unpack

1 Make sure you have all the parts shown below for your EPSON Stylus Pro 4000:

Paper tray

Printer

Power cord

Ink cartridges

Roll paper spindle

Exhaust port cover

Spindle adapters

 

 

(attached to spindle)

Warning: The printer weighs about 85 pounds, and should be lifted by two people.

2 Remove all the packing materials and tape. Save the box and packaging in case you need to ship the printer.

3 Loosen the two screws and remove the carriage retainer bracket.

4 Unlock the print head carriage by pulling the green tab to the left. Do not remove the tab.

Note: To lock the print head carriage for transportation, push the green tab to the right.

Set Up and Plug In

1

2

Connect the power cord to the AC inlet on the back of the printer.

Plug the other end of the power

cord into a properly grounded electrical outlet.

AC inlet

3 Attach the exhaust port cover by sliding it along the slots on the back of the printer.

4 Insert the paper tray into the slots at the front of the printer.