Turn on your Macintosh and your printer.

Connect to Your System

You can use either of the following connections. Make sure your system has the appropriate port, and you have a standard, shielded cable 10 feet long or less:

USB cable

IEEE FireWire® cable

If you have the optional EpsonNet Ethernet card, you can connect the printer directly to your network. You’ll need a standard RJ-45 network cable.

1 Make sure that both the printer and the computer are off.

2

Plug the interface cable into the

 

 

appropriate port on the printer.

IEEE FireWire connector

USB connector

3 Plug the other end of the cable into the appropriate connector on your computer or network hub.

Install the Software

Follow the steps below for Macintosh® or Windows®.

Macintosh

1

2 Insert the printer software CD-ROM. If necessary, double-click the EPSON CD-ROM to open its window.

3 Double-click the EPSON OS X Installer.

If you are using Mac® OS 9, double-click the EPSON OS 9 Installer.

4 Double-clickInstall Reference Guide and wait while the guide is installed.

5 Double-clickInstall Printer Driver and Utilities. Enter your password if necessary.

6 Follow the on-screen instructions to install your software. When you see a message informing you that installation was successful, click Restart to restart your Macintosh.

7 If you’re using OS X, continue with step 8.

If you’re using OS 9, open the Chooser from the Apple® menu. Select SPro 4000, then select your port and turn on background printing. Your installation is complete.

8 Open the Applications folder, then open the Utilities folder and open the Print Center or Printer Setup utility.

9 Click the Add icon at the top of the Printer List window.

Continue

▲