English

Returning the autocutter blade to the normal position

1.Open the roll paper cover by using the tab, as shown in illustration H.

2.Use a ballpoint pen or tweezers to turn the knob of the autocutter in the direction indicated by the arrow until you see a round shaft in the hole, as shown in illustration P.

Removing jammed paper

CAUTION:

The print head becomes very hot during printing. Allow it to cool before you reach into the printer.

1.Open the roll paper cover by using the tab, as shown in illustration H.

2.If you have a Type A printer, remove the take-up spool and open the unit by using the unit open lever, as shown in illustration I.

3.Remove the jammed paper.

4.Re-insert the roll paper and close the roll paper cover.

EPSON Ecology Label

This product is in compliance with the EPSON ecology label requirements. Please see the following link for detailed information on label criteria. (http://www.epson.co.jp/e/)

TM-U220 User’s Manual 9