12
Registering and deleting projectors for monitoring
Registration by specifying an IP address (Manual registration)PROCEDURE
Right-click in "Grouping view" and select "New" -
"Projector (manual registration)".
The following window will be displayed.
• If "Detail list view" is displayed, select "New" - "Projector (manual
registration)" from the "Edit" menu.
Enter the IP address of the projector to be registered
in the "IP address" box and then click [Search]. When
the message is displayed, click [OK].
• If using a serial ⇔ TCP/IP conversion adapter and cable to connect
the projector, select "Use Serial ⇔ TCP/IP conversion adaptor".
Enter the port number in "Port Number" and then click [Search].
After searching is complete, enter the information for
the projector to be registered while referring to the
table below.
1
TIP
You can also carry out this operation by selecting "Projector (manual
registration)" from "New" in the "Edit" menu.
Display name Enter the name of the projector(s) to be displayed in
"Grouping view" or "Detail list view".
Up to a maximum of 32 bytes can be entered.
A space cannot be used as the first character.
Display icon Select the icon(s) to be displayed in "Grouping view"
or "Detail list view".
Parent group Select when registering a projector in a group.
If no groups have been created, this cannot be
selected. s"Registering several projectors to a
monitoring group all at once" p.13
Projector
name
This shows the name that has been registered on the
projector.
IP address This shows the IP address that you entered in step 2.
Use Serial ⇔
TCP/IP
conversion
adaptor.
Select this if using a serial ⇔ TCP/IP conversion
adapter to connect the projector.
Port Number If using a serial ⇔ TCP/IP conversion adapter to
connect the projector, enter the port number.
2
3