Manuals / Brands / Computer Equipment / Computer Monitor / Epson / Computer Equipment / Computer Monitor

Epson V4.21 fSelecting display items, Select "Option" from the "View" menu. The "Option" window will be displayed.

1 35

Download 35 pages, 1.54 Mb

20

Monitoring window layout

*1 When "Temperature level display group view" is set to "On" at

"Environment setup" in the "Tool" menu, an icon indicating the internal

temperature of the projector will be displayed on top of the projector

icon. The default setting is "Off".

*2 Check the following items.

• Check that the projector's power is turned on.

• Check that the LAN cable is connected.

• Check that "Network Monitoring" is set to "ON" or "Standby Mode"

is set to "Network ON" in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

*4 You can display the "Replace Lamp" warning at any time preset in

"Environment setup" in the "Tool" menu.

fSelecting display items

You can select only the required items to be displayed in "Detail list view".

PROCEDURE

Select "Option" from the "View" menu.The "Option" window will be displayed.

Error information: Shows a notification or warning/problem status

using the following icons.

Clean Air Filter

Notice Lamp Cover Open

Replace Lamp*4 Lamp Error

High-temperature

warning

Lamp failure at

power on

Replace Air Filter High internal

temperature error

No Air Filter Internal Error

Low Air Flow Fan error

Air Flow Sensor Err. Sensor error

Low air flow error Other error

Air filter air flow

sensor error

TIP

The projector information that is generated when a problem is

detected is stored until EMP Monitor is closed. The EMP Monitor

displays will not be updated automatically even if the projector status

returns to normal. Click [Refresh] in the main window to update the

status.

1

Contents

Main Meanings of symbols used Contents Meanings of symbols used 1 Tasks that can be done using EMP Monitor 4 Operating environment 5 Registering and deleting projectors for monitoring 7 Monitoring window layout 17 Page Tasks that can be done using EMP Monitor Operating environment Compatible computers Installing EMP Monitor fLanguages supported by the application fLanguages supported by the automatic installer Limitations imposed by a Windows Vista environment Before starting operations Registering and deleting projectors for monitoring Starting EMP Monitor Page Setting the range of addresses to do an automatic search and registration Page Registration by specifying an IP address (Manual registration) Registering several projectors to a monitoring group all at once Page If the projector name or IP address changes after registration Cancelling (deleting) projector registrations Monitoring window layout fHow to switch views Click the "View" menu, and select "Grouping view" or "Detail list view". Monitoring using "Grouping view" fMeanings of "Grouping view" icons fUsing the icons in "Grouping view" Monitoring using "Detail list view" fMeanings of "Detail list view" icons fSelecting display items Select "Option" from the "View" menu. The "Option" window will be displayed. Searching for desired icons (Projector list) Monitoring using the system tray Click [OK]. Displaying projectors with problem or warning statuses in a list Select "Warning and Error Projector list" from the "View" menu. Checking properties in detail fDisplaying group properties Displaying and deleting logs Using the control functions Carrying out control using control buttons Carrying out control using a web browser (Web control) Carrying out control using timer settings Page Setting the mail notification function Select "Mail notification function" from the "Tool" menu. The "Set mail notification function" window will be displayed. Set the following parameters. Page An e-mail notifying the operator of a problem/warning/status is issued Application lock function Switching application lock between enabled and disabled Setting a password for cancelling application lock Troubleshooting