3. Plug the power cords into an electrical outlet.
The projectors' power lights turn orange. This indicates that the product is receiving power, but is not
yet turned on (it is in standby mode).
Note: With Direct Power On turned on, the product turns on as soon as you plug it in.
4. Press the power button on the commander projector or the remote control to turn on the product.
The projectors beep and the power lights flash green as the product warms up. After about five
seconds, the power lights stop flashing and turn green.
Warning: Never look into the projector lenses when the lamps are on. This can damage your eyes
and is especially dangerous for children.
If you do not see a projected image right away, try the following:
• Verify the lens covers are open all the way.
• Turn on the connected computer or video device.
• Insert a DVD or other video media, and press the play button (if necessary).
• Press the Source Search button on the projector or remote control to detect the video source.
Parent topic: Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
Turning Off the Product
Before turning off the product, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1. Press the power button on the projector or the remote control.
The product displays a shutdown confirmation screen.
44