Connecting a Component Video Source

If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a component-to-VGA video cable from Epson (see page 12) or an electronics dealer.

1.Connect the component end of the cable to the Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.

2.Connect the other end of the cable to the Computer (Component Video) port on your projector.

Computer (Component

Video) port

PowerLite S6 Series/

PowerLite 78

PowerLite W6 Series

3.You may need to change the Input Signal setting in the projector’s Signal menu to Auto (see page 64).

4.If you want to play sound through the projector, see page 34 for instructions on connecting an audio cable.

When you’ve finished making connections, see page 37 for instructions on turning on the projector and Chapter 2 for instructions on displaying and adjusting the image.

Setting Up the Projector 31