Setting Options Description
DRD All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
Single or more phone numbers to the same line and assign
Double different ring patterns to each. If you use this service,
select the number of rings for your fax number as the
Triple DRD setting so your product can receive faxes on the
Double & Triple correct number of rings. All is the default setting and
works for phone lines that do not use this service.
ECM On Turnson Error Correction Mode (ECM) to
automatically request retransmission of faxes
received with detected errors (default setting).
Off Turns off Error Correction Mode (ECM).
V.34 On Transmits faxes at 33.6 Kbps (default setting)
Off Transmits faxes at 14.4 Kbps
Rings to Answer 1 to 9Sets the number of rings before your product receives
a fax. The default setting is 4. If Auto Answer is turned
on and an answering machine is connected to the
product, make sure this setting is set higher than the
number of rings your answering machine is set to
answer a call.
Dial Tone Detection On Automatically dials the phone number you enter to
send a fax when the product detects a dial tone on the
line.
Off Turns off automatic dial tone detection. This is
necessary if you connected your product to a phone
line on a Private Branch Exchange (PBX) or Terminal
Adapter (TA) system.
Header Fax Header Lets you set up the header information for outgoing
faxes.
Your Phone
Number
Parent topic: Setting Up Fax Features Using the Product Control Panel
Fax Report Options
Select the fax report or list you want to print.
162