ØConverting To An “All Refrigerator”
1.Turn off the control knob to the “OFF” position.
2.Close the main valve on the CO2 cylinder.
3.Close the secondary
4.Close the connection between the beer keg and the keg coupler.
5.Drain any remaining beer from the lines.
6.Disconnect the beer line and CO2 air line from the keg coupler
7.Remove the beer keg.
8.Remove the keg coupler.
9.Disconnect the air line from the CO2 cylinder.
10.Remove the CO2 air line from cabinet plug
11.Replace the air line rear cabinet plug
12.Remove the beer tower. Also pull the beer line thru the top of the cabinet
13.Replace the top cabinet plug
14.Adjust temperature as desired.
14
