Equator PAC 12 Using The Control Panel, Power Source, Cooling Operation, Dehumidifying Operation

USING THE CONTROL PANEL

POWER SOURCE

•The AC socket must be firm and reliable.

•Don’t connect the Portable air conditioner to a multiple socket outlet which is also being used for other electrical appliances.

•Insert the AC power plug securely into the AC socket before using the unit. Two seconds after it beeps, press the ”ON/OFF“ button to start the unit.

COOLING OPERATION

1.Repeatedly press ‘MODE” button to choose the cooling mode, LCD window will show “COOL”. During the cooling operation, always place the duct through an open window to exhaust warm air from the room.

2.Repeatedly press “TEMP+” or “TEMP -“ button to set a proper room TEMP at 63°F-88°F.

3.Press “FAN SPEED” button to choose a proper fan speed, high, middle, or low speed.

4.Press “SWING “button to adjust the air delivery direction. The LCD window will show”

NOTE:

In order to improve the cooling efficiency, be careful that:

a)If your room is directly exposed to the sun, please draw the curtains.

b)Do not place near other heat source.

DEHUMIDIFYING OPERATION

1.Keep the windows and the doors closed to aid in effectively dehumidifying the room.

2.Repeatedly press” MODE” button to choose the dehumidifying mode, LCD window will show “DRY”, the fan speed cannot be adjusted.

3.When used as dehumidifier only, do not use the air exhaust duct.

HEATING OPERATION

1.Repeatedly press the” MODE’ button, select the heat mode, The LCD window shows “HEAT”.

2.Press ‘TEMP +“ or “TEMP-” button to set a proper room temperature at 63°F-88°F (or

17°C-31°C).

3.Press ‘FAN SPEED’ button to choose the high-middle-low fan speed

4.Press ‘S WING’ button to adjust the air delivery direction, The LCD window will show’

TIME SET FUNCTION

1.To set time to start the machine with the unit off (but power supplied), press” TIMER” button, the LCD window will show” “ press the TIME button, set the time to start as you like. The setting range is 1-12 hour

2.To set time to stop the machine with the unit running, press “TIMER’ button, the LCD window will show”® —OFF’, press the TIME button set the time to stop the machine as you like. The setting range is 1-12 hours.

3.If you have set switch on/off after 12 hours, press this key again then could cancel the timing.

AUTO SWING FUNCTION

1.Press the ”SWING” button, the LCD window will show and then begin to swing automatically.

2.Press the “SWING“ button again, the symbol” “in the LCD window will disappear, the swing mode will stop.

Attention:

If you Press the ”A“ and ”V“ buttons together for more than two seconds the keys will lock, LCD window will show” ~ “,press the two buttons again can unlock the keys, the symbol ”~” will disappear.

12 Portable Air Conditioner Owner’s Manual