User Interaction With SIM AT
DISPLAY TEXT | A text string of up to 160 characters (80 UCS coded) is supported. |
Text clearing times | |
‘Key’ responses | ‘Long NO’ – Proactive session terminated by user. |
| ‘NO’ – Backward move in proactive session. |
| Any other key clears display if the command is performed success- |
| fully. |
GET INKEY | Prompt for a one character input. Pressing ‘YES’ without entering a |
| character gives warning message “Minimum 1 character”. |
‘Key’ responses | ‘CLR’ clears current character. |
| ‘Long NO’ terminates the proactive session. |
| ‘NO’ – Backward move in proactive session. |
| ‘YES’ – Command performed successfully. |
GET INPUT | Prompt for character input. Pressing ‘YES’ without entering a charac- |
| ter gives warning message “Minimum ‘no’ characters”. The phone will |
| refuse to accept further input when maximum response length is |
| exceeded. |
MMI Maximum Response lengths | |
| Digits Only – 160 characters |
| SMS default alphabet characters – 160 characters |
| Hidden Characters (Digits Only) – 20 characters |
‘Key’ responses | ‘CLR’ clears current character/characters. |
| ‘Long No’ terminates the proactive session |
| ‘NO’ – Backward move in proactive session |
| ‘YES’ – Command performed successfully |
REFRESH | When a Refresh Reset command is executed by the phone it will |
| prompt the user with the text 'Please wait' and then the phone will |
| restart. |
SELECT ITEM | Scroll to highlight item for selection. The maximum number of items |
| supported by the phone within one Select Item command, is 30. |
‘Key’ responses | Down arrow – Scroll down list |
| Up arrow – Scroll up list |
| Long No’ terminates proactive session |
| ‘NO’ – Backward move in proactive session |
| ‘YES’ – Command performed successfully |
SEND SHORT MESS. | Default message “Sending message Please wait” can be replaced for |
| the Alpha Identifier text, or suppressed completely if a null text is pro- |
| vided. Responses are “MESSAGE FAILED” or MESSAGE SENT”. |
‘Key’ responses | ‘Long No’ or ‘NO’ terminates the proactive session |
SET UP CALL | If the ME is on a call when the command 'Set up Call, putting all other |
| calls on hold' is sent, the user will see the text 'Setting up a call current |
| call will be held'. If the 'YES' key is pressed the current call will be put |
| on hold and the new call set up. If the ME is on a call when the com- |
| mand ‘Set Up Call, disconnecting all other calls’ is sent, the user will |
| see the text ‘Setting up a call current call will be disconnected’. If the |
| ‘YES’ key is pressed the current call will be disconnected and the new |
| call set up. |
SET UP MENU | Incorporates a SIM Application Toolkit Menu Item into the ME’s main |
| menu structure. From the standby display the right or left arrow but- |
| tons can be pressed to select the Menu Items. (Note: The SIM AT menu |
| option is found in the ‘Extras’ menu.) |
If an Alpha Identifier is supplied in the Set Up Menu command this is used as the SIM AT entry in the ME’s main menu. If no alpha identifier
38
