Ericsson TT1222 Installing the Equipment, 2.1Introduction, 2.2Operating Voltage, 2.2.1AC Models

2BInstalling the Equipment

2 Installing the Equipment

2.1Introduction

For best performance and reliability follow the instructions for site requirements and installation in the Reference Guide and only use installation accessories recommended by the manufacturers.

2.2Operating Voltage

2.2.1AC Models

AC models are fitted with a wide-ranging power supply. It is suitable for supply voltages of 100-240 Vac -10% +6% at 50/60 Hz nominal.

Caution!

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your business, consult a qualified electrical engineer or your local power company.

Note: Refer to the Reference Guide for details of the color codes used on the mains leads.

See Table 5 for fuse information and also the Reference Guide for a full power supply specification.

2.3Power Cable and Earthing

Check that the power cable is suitable for the country in which the Receiver is to be used.

(Power Cable Information: H05VV-F, 0.75mm2, 3G or greater)

EN/LZT 790 0002/1 R1A 2011-02-21 7 (20)