Ericsson W25 4.10.1 Persistent Logging

Configuration and Management

The system logging information is written to 3 files in the system and these

files are rotated in a circular fashion. The files are not saved to flash

memory and will be lost when rebooting the system or when power is

disconnected.

To view only a selection of the log events in the list, select a filter level from

the “Display” list. Available log levels are “Alarms only” and “All”. The

“Alarms only” log level corresponds to the Alarm indicator on the Ericsson

W25 unit and the information in the “ALARMS” section on the Overview

page.

Click Refresh to update the list with new information. The most recent logs

are listed at the bottom of the list.

4.10.1 Persistent Logging

If persistent logging is enabled, the log files are written to flash memory in

two alternating files meaning they will remain after a system restart or

power failure.

Note: Persistent logging should only be used for debugging purposes

since it consumes flash memory.

To enable this feature, select the “Persistent logging” check box on the

Event Log page and click Apply to save the setting

62 5/1551-CRH 102 167 Uen Rev E 2008-02-15

Contents

Main Ericsson W25 Fixed Wireless Terminal for WCDMA/HSDPA Mobile Networks User's Guide Software Release 1.4 (R10) Ericsson W25 Fixed Wireless Terminal for WCDMA/HSDPA Mobile Networks User's Guide Contents Page Page Page 1 Introduction 1.1 Structure of this Guide 1.2 Product Overview Page 1.2.1 Indicators 1.2.2 Connectors 2 Battery 2.1 Installation of the Battery 2.2 Battery Function 3 Telephony and Fax 3.1 SIM Authentication 3.2 Information Tones Page 4 Configuration and Management 4.1 Access and Login to the Web User Interface 4.1.1 Inactivity Timeout 4.2 Overview 4.2.1 Change Default Password 4.2.2 Alarms 4.2.3 Network Information Page 4.3 Configuration Wizard 4.3.1 Internet Access Page 4.3.2 Wireless LAN Access Page Page Page 4.3.3 Wireless LAN Authentication Page Page Page Page 4.3.4 Configuration Wizard Confirmation Page 4.4.1 Mobile Network Connection Details 4.4.2 Traffic Statistics 4.4.3 Authentication Page Page 4.4.4 Cellular Band Selection 4.5 LAN 4.5.1 LAN IP Address 4.5.2 DHCP Server Page 4.5.3 Traffic Statistics 4.5.4 LAN Port Status 4.6 Wireless LAN 4.6.1 Enable WLAN 4.6.2 Region 4.6.3 Radio Channel 4.6.4 Transmit Power [dBm] 4.6.5 Scan for Wireless Networks 4.6.6 Network Name (SSID) 4.6.7 WLAN Security Page 4.6.8 Connected Devices 4.6.9 Whitelist Page 4.7 NAT 4.7.1 UPnP IGD 4.7.2 Application Level Gateways 4.7.3 Port Forwarding Page Page Page 4.8 File and Printer Sharing 4.8.1 How it Works 4.8.2 Host Name and Workgroup 4.8.3 File Sharing 4.8.4 Printer Sharing Page Page 4.9.1 Basic System Information 4.9.2 Configuration Backup and Restore 4.9.3 System Restart 4.9.4 Software Update Page 4.9.5 Factory Reset Page 4.10 Event Log 4.10.1 Persistent Logging 5 PC Configuration 5.1 IP Settings 5.1.1 Obtain IP Settings Automatically Page 5.1.2 Configure Static IP Address 5.2 Wireless LAN Settings 5.2.1 Prepare the Wireless Client(s) 5.2.2 Install the Wireless LAN Interface 5.2.3 Configure Access to the Ericsson W25 5.3 Sharing Settings 5.3.1 Check Workgroup Settings 5.3.2 Access a Shared Storage Device 5.3.3 Set Up a Connection to a Shared Storage Device 5.3.4 Access a Shared Printer Page Page 6 Troubleshooting 6.1 Restart the Ericsson W25 6.2 Reset the Ericsson W25 to Factory Default Settings 6.3 LAN Connections 6.4 Internet Access 6.4.1 Change TCP Settings 6.5 Telephony and Fax Service 6.6 Wireless LAN Connection Page 6.7 Access to Shared Files or Printer Page Glossary