Quick Setup 6640 Intech Blvd.
Indianapolis, Indiana 46278, USA www.escient.com
Email: support@escient.com
Document Number:
1. UNPACK YOUR NEW FIREBALL™ SEi
•Unpack the FireBall, cables, and accessories (save the box).
•Make note of the serial number (located on the back).
SERIAL NUMBER: _________________________________________
2. CONNECT FIREBALL TO YOUR A/V SYSTEM
•Locate the included composite video and analog audio cables.
•Connect FireBall to any available A/V input on your receiver or Telly.
Note: You may use optional
4. POWER UP!
•Plug FireBall into an AC outlet.
•The Standby LED on the front of the FireBall will begin to flash RED during the power on cycle. When the LED turns solid RED, the FireBall is ready for use.
•Press the power button on the front panel or on the remote control.
The LED will turn solid BLUE and video will be displayed on the Telly when the unit is on.
Note: You may have to press the "FB1" button on the remote to configure it to control FireBall. Also be sure the Telly and receiver are turned on and set to the correct FireBall input.
5. QUICK START
• Use the remote control and follow the
Note: The default video output mode is NTSC. Instructions for changing the video mode to PAL are in the User's Guide.
3. CONNECT FIREBALL TO THE INTERNET
FireBall requires an Internet connection to identify the CDs played and recorded in the front panel drive, for playing Internet Radio stations, and for general system maintenance.
•Connect the included ethernet cable from FireBall's ethernet jack to your ethernet network.
NOTE: You may need to purchase additional network hardware such as a "router". Please contact your Escient dealer for more information.
Optical Out to the receiver for digital audio
Composite or
Component Video Out to the Telly or other display device
©2007 Escient. All rights reserved. Escient and the Escient logo are registered trademarks and FireBall and Physital are trademarks of Digital Networks North America, Inc. All other trademarks are property of their respective owners. Escient reserves the right to change product hardware, features and software without notice. Upon any change, materials are updated as quickly as possible, but may not be reflected in documents already distributed. Supported hardware is updated continually. If you wish to interface with hardware that is not listed on this data sheet, please call Escient at 800.372.4368.
Power to electrical outlet | IR In for IR external |
| control |
Analog In from external | Ethernet Network Jack | |
analog audio source | ||
| connects FireBall to your | |
Analog Out to the | broadband Ethernet | |
network. | ||
receiver for analog audio | ||
|