Connections, SACD/CD Drive Unit P-01 | Esoteric D-01 instruction

Connections

CAUTION:

<Switch off the power to all equipment before making connections.

<Read the instructions of each component you intend to use with this unit.

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

SACD/CD Drive Unit (P-01)

If you are using the G-0/G-0s, make a direct connection between its WORD CLOCK OUT and the P-01’s WORD SYNC IN.

BNC coaxial cable (75Ω)

IEEE 1394	XLR digital
cable	cable

Connect either cable.

D-01 (FRONT L channel)	C	A	A
D

B	B
RCAcable	XLRcable
Connect either cable.

AUDIO IN (FRONT L)

BNC coaxial cable (75Ω)

WORD

SYNC

OUT

Supplied power cord

XLR pin assignment

Amplifier	D-01 (other than FRONT L channel)
	or a Clock Generator (G-0/G-0s)

Page 6

Image 6

Esoteric D-01 manual Connections, SACD/CD Drive Unit P-01

Contents

Monaural D/A Converter For Super Audio CD and CD Important Safety Instructions For U.S.A Contents Before Use Features Copyright protection system Dtcp How to connect multiple i.LINK-capable devicesLink Ieee Data transfer rate Connections SACD/CD Drive Unit P-01 When the P-01 is connected Signal GND connectionPower cord receptacle Digital audio input terminals Front R Example Connection to the P-01 and the G-0/G-0sAmplifier G-0s Down mode Names of Each ControlOff tuned off Input select switch Off Press the Output button +/- to select a channel First Thing To DoBasic Operation Press the Input button to confirm the entry Setup mode will be cancelled in the following instances Changing the SettingsRestoring factory settings Press and hold the Filter button for more than 3 seconds Chsel Channel Select Ieee 1394 remote control function 1394RCWout Word sync output frequency DSD gain Troubleshooting Messages on the Display Specifications Block Diagram

Connections

SACD/CD Drive Unit (P-01)

D-01 (FRONT L channel)