Changing settings
1Press the MENU button until the item you wish to change appears.
The GUI indicator lights.
The display indication changes with each press of the MENU button.
<The
W_OUT
Select a word frequency (kHz) when the WORD button is set to “W_OUT”. The factory default is 44.1 kHz.
44.1 
88.2 
176(176.4)
100 
192 
96 
48
CH_SEL
Select channel received when INPUT is set to i.LINK. L/R is the factory default.
L/R: front left and right
C/LFE: center and subwoofer
LS/RS: surround left and right
The select channel icons light.
The icons flash when the selected channels do not reflect input signals. In this event, change channels or check digital device connections.
(Normal display)
This exits the setup mode.
2Use the SELECT button to change settings.
3Press the MENU button (or leave the unit idle for 10 seconds) to end settings.
Press the MENU button once or twice to exit the setup mode and return to the normal display.
Restoring factory default settings
Made settings persist on a semipermanent basis even when the power plug is disconnected.
Use the following procedure to clear all settings and restore the unit to the factory defaults.
1.Turn the unit off.
If the unit is on, turn off the unit and wait 30 seconds.
2.Press the POWER switch while holding down the FILTER button.
Hold down the FILTER button until the unit is powered up and the display lights.
13