Before Use

What’s in the box

Please confirm that the following accessories are in the box when you open it.

Power cord x 1

Felt pads x 3

Owner’s manual x 1

Warranty card x 1

Read this before operation

<As the unit may become warm during operation, always leave sufficient space around the unit for ventilation.

<The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

<Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.

<Do not place the unit on the amplifier/receiver.

<Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.

<When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.

<Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. A soft cloth moistened with a diluted amount of household or window cleaner can be used to remove more stubborn dirt.

<Keep this manual in a safe place for future reference.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit.

“Super Audio CD” is a registered trademark. “DSD” is a registered trademark.

The i.LINK logo is a trademark of Sony Corporation, registered in the U.S. and other countries.

Placement of the unit

High-quality hardened tool steel is used for the pin-point feet attached to the bottom of the player. Although the outer feet may appear loose, the weight of the unit causes them to become firm and secure. The design effectively damps and reduces vibration.

<WARNING: Be careful to avoid injury when moving the unit. This unit weighs about 27 kg. Seek assistance when moving or placing this product.

<To protect the supporting furniture surface, you may stick the felt pads supplied with the unit to the bottom of the metal feet.

Pin-point foot

Bottom plate Frame

of the unit

Steel foot

Cover foot

Cover foot retaining screws

 

5