Setting the Word sync, DAC, priority playback area, and i.LINK output (1)

Available menu item and options

WORD (Word sync)

Use this feature to lock your entire system to a single sync signal (clock) by connecting this unit to the Esoteric G-0s or similar device that outputs a sync signal.

“ON” or “OFF” are available.

<This unit is ready for the clocks up to 176.4 kHz and switches itself depending on an incoming signal.

<Make connections to the WORD SYNC terminal before turning on the unit.

<When the unit is synchronizing to the sync signal, the ring surrounding the MODE button flashes. When it is locked, the button lights.

<If no valid sync signal is received, the display shows “No Word!” or “Wrd Unlck!”.

DAC (D/A converter)

This unit is equipped with the following DA converters:

•DSD DAC for DSD signals (AD1955 from Analog Devices, Inc.)

•1-bit DAC for PCM signals (AD1955 from Analog Devices, Inc.)

•Multi-bit DAC for PCM signals (PCM1704 from Burr-Brown)

This setting allows you to determine which DAC will be selected for playback.

REF. (Reference)

The unit automatically selects the proper DAC for the disc currently loaded.

The selection depends on the Analog Out (see page 21).

M.bit (Multi-bit)

Use the Multi-bit DAC.

DSD signals from Super Audio CDs are converted to PCM signals.

The MULTI-BIT indicator lights during playback.

1 bit

Use the 1-bit DAC.

DSD signals from Super Audio CDs are converted to PCM signals.

The 1-BIT indicator lights during playback.

DSD

Use the DSD DAC.

PCM signals from CDs are converted to DSD signals (1 bit, 64 fs).

The DSD indicator lights during playback.

<You can also use the left or right cursor button to change the DAC setting (either when playing back or stopped).

(Continued on the next page.)

ENGLISH

17