Remote Control Unit

How to insert the batteries

Remove the end cover of the remote control unit with a screwdriver. After checking the polarity (+/_) of two AA batteries, insert the batteries observing polarity, replace the end cover and replace the screws.

Battery Replacement

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

Precautions concerning batteries

<Be sure to insert the batteries with correct positive “+” and negative “_” polarities.

<Use batteries of the same type. Never use different types of batteries together.

<Rechargeable or non-rechargeable batteries can be used but not mixed together. Refer to the precautions on their labels.

<When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

Notes on use

<Point the remote control unit at the player’s remote sensor within seven meters (23 feet) of the player. There should not be any obstacles between the player and the remote control unit.

<Do not allow direct sun or other light to shine on the remote sensor on the player. This may cause the remote control unit to malfunction.

<Note that other units with remote controls may operate incorrectly because of infrared light “overspill” when you operate this remote control unit.

Restoring factory settings

If you have made a lot of changes to the setup, and want to restart from a known set of options, restore the unit to the factory settings as follows:

1.

Turn the unit off and wait 30 seconds or longer.

ENGLISH

2.

Press the POWER button while holding down the STOP

 

button.

All memories are erased, and the unit returns to the factory settings.

7