9)Replace the evaporative wick frame assembly into the guides provided in the bottom of the cabinet and the ribs along the sides of the cabinet.
10)Place the chassis unit onto the cabinet ensuring that the chassis seats correctly into the front and back grooved edges of the cabinet.
wavy |
line |
Filling the Humidifier:
Note: This wavy line is the fill level indicator. Do not fill above this mark.
11) Before filling the humidifier with water, be certain that the speed control switch is turned off and that the humidifier is unplugged. Fill the water reservoir with cool, fresh, preferably unsoftened water. If you have only softened water available in your home, you can use it, but you will notice a build up of
minerals on the evaporative wick much sooner. Fill the humidifier to the level indicated on the wick frame assembly and “Fill to Here” decal on the cabinet side wall. Do not overfill the humidifier. The upper portion of the wick element must remain exposed above the fill level
indicator mark. When the humidifier is full the float switch will allow the humidifier to run. When the water level drops to the refill level, the humidifier will automatically shut off and the “refill” indicator will light. When first filled, reservoir capacity is 6 gallons.
12)We recommend using Bemis by Essick Air Bacteria Treatment every time you refill the humidifier to eliminate bacteria growth. Add bacteriostat according to the instructions on the bottle.
13)The air exit grille should be placed on the front of the humidifier in the recessed area provided. Insert the bottom edge first.
14)Plug the cordset into the wall receptacle. Humidifier is now ready for use. NOTE: If you have not filled the humidifier with water the unit will not run.
