Manuals / Estate / Kitchen Appliance / Refrigerator

Estate 2316077B Refrigerator Doors, Connect to Refrigerator Style, Complete the Installation

Models: 2316077B

1 40
Download 40 pages 29.49 Kb
Page 5
Image 5

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Connect to Refrigerator

NOTE: On kit models, assemble water valve to refrigerator per kit instructions.

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

A

B

C

D

A. Tube clamp

C. Compression nut

B. Copper tubing

D. Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Disconnect the tube clamp on the back of the product and insert the copper tubing through the clamp as shown.

3.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown.

4.Tighten the compression nut. Do not overtighten. Reattach the tube clamp and tube to the back of the cabinet.

A

B

C

A. Tube clamp

C. Compression nut

B. Copper tubing

5.Turn shutoff valve ON. Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

■Before you begin, turn the refrigerator control OFF. Unplug refrigerator or disconnect power.

■Remove food and adjustable door or utility bins from doors.

■If you are only removing and replacing the doors, see the “Remove Doors and Hinges” and “Replace Doors and Hinges” sections.

■Depending on your model, you may have standard (Style 1) or contoured (Style 2) doors. If you are also going to reverse the door swing, follow the instructions for the appropriate door style.

Remove Doors and Hinges

⁵⁄₁₆" Hex-Head Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

3.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

4.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

5.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

5

Page 4 Page 6
Page 5
Image 5
Estate 2316077B Refrigerator Doors, Connect to Refrigerator Style, Complete the Installation, Remove Doors and Hinges
Page 4 Page 6

2316077B specifications

Estate 2316077B is a groundbreaking development that has transformed the landscape of modern living. This estate is designed not just as a place to reside but as a harmonious integration of sustainability, technology, and lifestyle amenities. One of its main features is the emphasis on eco-friendly architecture, which incorporates renewable resources, energy-efficient designs, and sustainable materials. The buildings are constructed with advanced insulation techniques that minimize energy loss, lowering utility costs for residents.

The estate boasts smart home technologies that redefine convenience and security. Every unit is equipped with a comprehensive home automation system that allows residents to control lighting, heating, and security features from their smartphones or tablets. This integration of technology not only enhances comfort but also promotes energy efficiency, as systems can be optimized for usage patterns. Additionally, advanced security measures, including biometric entry systems and 24/7 monitoring, provide residents with peace of mind.

Another notable characteristic of Estate 2316077B is its commitment to community and wellness. The estate includes lush green spaces, walking trails, and recreational areas that encourage outdoor activities and social interactions. There are dedicated zones for gardening, playgrounds for children, and facilities for fitness and relaxation. Together, these features foster a strong sense of community among residents, making the estate a desirable place to live.

The technological amenities extend beyond smart home features. Internet connectivity is robust, with high-speed fiber-optic networks available throughout the estate. This ensures that residents can easily work from home, stream entertainment, and engage in online learning without interruptions.

Moreover, Estate 2316077B is strategically located near essential services such as schools, shopping centers, and healthcare facilities. Its accessibility to public transportation further enhances its appeal, making commuting convenient for those who work in nearby urban centers.

In summary, Estate 2316077B represents a forward-thinking approach to modern living, blending innovative technologies, sustainable practices, and community-centric design. Its focus on providing a high-quality lifestyle while prioritizing environmental responsibility makes it a premier choice for discerning homeowners. As urban living continues to evolve, developments like Estate 2316077B set a new standard for what residents can expect from their living environments.