9.Open the broiler door. Use a 3⁄8" drive ratchet to lower the rear leveling legs one-half turn. Use slip-joint pliers to lower the front leveling legs one-half turn.

B

A

A. Rear leveling leg

B. Front leveling leg

10.Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of 3⁄16" (0.5 cm) is needed to engage the anti-tip bracket.

11.Move the range into final location making sure the rear leveling leg slides into the anti-tip bracket.

12.If installing the range in a mobile home, you must secure the range to the floor. The method of securing the range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

13.Continue installing your range using the following installation instructions.

Verify Anti-Tip Bracket Location

1.Make sure the anti-tip bracket is installed:

■Look for the anti-tip bracket securely attached to the floor.

■Slide the range back so the rear range foot is under the anti-tip bracket.

2.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the standards in the “Location Requirements” section.

B

A

A. Anti-tip bracket

B. Range foot

3.Continue installing your range using the following installation instructions.

Level Range

1.Place rack in oven.

2.Place level on rack and check levelness of range, first side to side; then front to back.

3.If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket. Use 3⁄8" drive ratchet and slip-joint pliers to adjust leveling legs up or down until range is level.

4.Push range back into position.

5. Check that rear leveling leg is engaged in anti-tip bracket.

NOTE: Range must be level for satisfactory baking performance.

Make Gas Connection

Typical rigid pipe connection

A combination of pipe fittings must be used to connect the range to the existing gas line. Your connection may be different; according to the supply line type, size, and location.

1.Apply pipe joint compound made for use with LP gas to all pipe thread connections.

2.Using a pipe wrench to tighten, connect the gas supply to the range.

 

B

 

C

A

 

 

D

 

E

 

F

G

 

A. Pressure regulator

D. Union

connection fitting

E. Nipple

B. 90˚ elbow

F. Manual shutoff valve

C. Black iron pipe

G. 1⁄2" to 3⁄4" gas pipe

9

Page 8 Page 10
Page 9
Image 9
Estate W10173755D Verify Anti-Tip Bracket Location, Level Range, Make Gas Connection, Typical rigid pipe connection
Page 8 Page 10

W10173755D specifications

Estate W10173755D is a highly sought-after property that has become a focal point for potential homeowners seeking a blend of modern amenities and classic elegance. Located in a prime area, this estate is characterized by its stunning architecture, spacious layout, and impressive technological features.

One of the standout aspects of Estate W10173755D is its extensive living space. Spanning over several thousand square feet, the property includes multiple bedrooms and bathrooms, making it ideal for families or those who frequently entertain guests. The open floor plan allows for seamless flow between the living, dining, and kitchen areas, creating a welcoming atmosphere. Large windows throughout the estate provide an abundance of natural light, enhancing the warmth and charm of the interior spaces.

Among the technological features of Estate W10173755D, smart home integration stands out. The estate is equipped with a comprehensive smart home system that allows residents to control lighting, climate, security, and entertainment systems with ease. This technology enhances both convenience and energy efficiency, as homeowners can monitor and adjust their home environment remotely via smartphone applications.

The kitchen is a chef's dream, featuring state-of-the-art appliances, including a double oven, a spacious refrigerator, and a professional-grade range. Ample counter space, combined with stylish cabinetry, makes meal preparation a pleasure. The adjacent dining area is perfect for hosting dinner parties or enjoying family meals.

Outdoor space is equally impressive, with beautifully landscaped gardens and a spacious patio area that overlooks a private swimming pool. This outdoor oasis is perfect for relaxation and entertainment, providing a tranquil retreat right in the backyard.

Added features of Estate W10173755D include a home office that facilitates productivity, a cozy media room for family movie nights, and a dedicated gym area to cater to fitness enthusiasts. Additionally, the estate is equipped with sustainable technologies, such as energy-efficient heating and cooling systems, which contribute to a reduced carbon footprint.

In summary, Estate W10173755D presents a unique opportunity for discerning buyers looking for a home that combines luxury, comfort, and modern technology. With its spacious layout, high-end finishes, and sophisticated smart home capabilities, it is truly a standout property that offers the best of contemporary living.
Top Page Image Contents