Systems

REMOTE LED INDICATOR: This can be used with remote switch as a remote unit activity indicator. A flashing LED indicates the unit is actively sequencing. When the LED is on constant the unit is completely “ON” or “OFF.” To use this feature the (-) negative short lead of the LEDs is connected to terminal 2, and the (+) positive long lead of the LED is connected to terminal 3.

One of the two options must be used in order for the outlet to operate!

1.Connect a SPST / NO / Latching switch to terminals 1 & 2. Closed contact turns outlets on. Open contact turns outlets off.

2.Connect the output from any ETA sequencing unit to the input terminals 4 & 5.

ADDITIONAL CONNECTIONS should be made at this time. These connections may include the LED indicator, input and/or output for daisy chaining.

FINAL CONNECTION: Connect the PS220’s flying wire leads to the wires inside the outlet box. Green is Ground, Black is Hot, and White is Neutral. Minimum 12 gauge wire.

"CAUTION"

REMOVE ALL POWER BEFORE INSTALLING OR SERVICING THE UNIT

"CAUTION"

THESE INSTRUCTION ARE FOR USE BY QUALIFIED PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT PERFORM ANY INSTALLATION OR SERVICING OTHER THAN THAT CONTAINED IN THE OWNERS MANUAL UNLESS YOU ARE QUALIFIED TO DO SO.

“ATTENTION”

THIS DEVICE IS TO BE INSTALLED BY DESIGN INTO A WALL WITH AN OUTLET BOX. FOR PROPER FIT,

A 3-GANG OUTLET BOX IS REQUIRED WITH THE MINIMUM SIZE OF 67.3 CU. IN.

“CAUTION”

THE INSULATING BARRIER PROTECTING PS220 COMPONENTS MUST BE USED WHEN INSTALLING THE PS220. PLACE THE OUTLET WITH THE INSULATING BARRIER INTO THE OUTLET BOX AND SCREW THE COVER PLATE AND THE INSULATION BARRIER TO THE OUTLET BOX BEFORE APPLYING POWER TO THE UNIT.

KL3RR

KEYLOCK POWER DISTRIBUTION

SEQUENCINGOFF SYSTEM ON

	ETA SYSTEMS
	A Creative Light And Sound Company
KL3R	KL3RR
1-Gang Profile	Standard 19” Rack-Mounted Version

Thank you for choosing

ETA Systems Power Distribution

Drawing upon our 25 years of solving high-amperage lighting needs and listening to customers’ concerns, we have developed a most extensive line of Audio Conditioned Power Distribution. As the problems inherent with AC power increase, you will find ETA providing solutions.

Telephone or e-mail us requesting a Full Line Brochure

A Creative Light & Sound Company

1532 Enterprise Parkway • Twinsburg, Ohio 44087 USA 330-425-3388 • 800-321-6699 • Fax: 330-425-9700 http://www.etasys.com E-mail eta@etasys.com

All designs and specifications are subject to change without notice.

11/03 6MAN-034

ETA Systems PS220 owner manual Thank you for choosing ETA Systems Power Distribution

Models: PS220

Thank you for choosing

SYSTEMS