INITIAL SETUP
1.Open the battery compartment; it slides downward with firm pressure at center of hinge.
2.Connect the battery pack.
POWER SOURCES
1.Rechargeable battery pack (included).
2.3 AA batteries (not included).
3.AC adapter/charger (not included).
4.Continually turning the crank, even with no batteries installed.
CHARGING THE BATTERY PACK
1.Switch the power selector to the OFF position.
2.Turn the
3.After charging, select the DYNAMO/ADAPTOR position for power.
While charging, the red LED charging light illuminates.
AA BATTERY OPERATION
1.Open the battery compartment.
2.Install 3 AA batteries, observing polarity diagram.
3.For power, set the power selector switch to the BATTERY position.
4
FR250 OPERATION MANUAL
USING AN AC ADAPTER (NOT INCLUDED)
1.Plug the adapter into the DC 4.5 V socket.
2.For power, set the power selector switch to the DYNAMO/ADAPTER position.
EMERGENCY OPERATION WITH NO POWER SOURCE
1.Set power selector switch to DYNAMO/ADAPATOR.
2.While continually turning the dynamo crank, radio stations can be tuned and the lights and siren function.
CELL PHONE CRANK CHARGING
Because cell phone batteries vary in their current ratings, we cannot specify charging rates or usage time. 10 to 15 minutes of cranking may result in 1 or more minutes of
1.Set power selector switch to OFF position.
2.Plug the cell phone charging cord into the Phone Charge socket.
3.Select the correct charging tip for your phone.
4.Plug charging tip into the charging cord and into the phone’s charging socket.
5.Rotate the dynamo crank.
TURNING THE RADIO ON AND OFF
Turn it on with the POWER switch.
1.Select the BATTERY position when using AA batteries.
2.Select the DYNAMO/ADAPTER position when powering via the AC adapter or internal, rechargeable
3. To turn off, set power selector switch to OFF. | 5 |
|
