Eton owner manual Ac Adapter/Charger Specifications, USING THE FR300 AS A CELL-PHONECHARGER

FR300 OWNER’S MANUAL

4 POWER SOURCES continued

left of FR200). For proper operation, the AC adaptor/charger must meet the specifications described below.

AC ADAPTER/CHARGER SPECIFICATIONS

Output of 4.5 volt DC; negative polarity; 200 milliamperes current capability; plug tip outer diameter of 3.4 millimeter, inner diameter of 1.3 millimeter.

To power the FR300 with an AC adaptor/charger, plug it in and set the power selector switch to the DYNAMO/ADAPTOR position.

IMPORTANT NOTE: If using an AC adaptor rated higher than 200 milliamps, unplug the internal rechargeable battery to avoid damaging it.

USING THE FR300 AS A CELL-PHONE CHARGER

Because cell phone batteries vary in their current ratings, we cannot specify charging rates or usage time.

There are two cellphone charging methods:

METHOD 1 – dynamo.

1.Slide the power selector switch to the OFF position.

2.Attach the cell phone to the FR300 with the cell phone extension wire and correct plug tip for your phone.

3.Rotate the dynamo crank either clockwise or counter-clockwise at about 2 turns per second. (The cell phone Charging Indicator will activate during charging).

6