SOLARLINK FR600 OWNER’S MANUAL

4)Press <SELECT> shortly once to enter the alert mode setting mode.

5)Press <> or <> shortly to select the alert mode (SIREN & VOICE).

Note: The selected alert mode will appear in the display.

6) After setting, press <SELECT> shortly to save.

SETTING COUNTY CODES (CLC CODES IN CANADA) County code setting is described below.

A county code instructs the radio only to receive an ALERT when the code is programmed in. Look up a United States county code at the following web site: http://www.nws.noaa.gov/nwr/indexnw.htm#sametable

Look up a Canadian CLC code at: http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/ index_e.cfm

Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be set to receive ALL coded information sent from any transmitter, if your within range. When you set codes, it will only pick up alerts when you’re in that county or within reception distance of the signal.

To set codes:

1)Revolve the <Band Selecting Knob> to the “OFF” position.

2)Press the <MENU> button shortly to enter the setting menu.

16

Page 16
Image 16
Eton ARCFR600R owner manual Press the Menu button shortly to enter the setting menu