Eton FR800 Snooze Setting, AM/FM Broadcast Reception, Reception of Noaa Weather Frequencies

SNOOZE SETTING

Once the alarm activates, press the SNOOZE button to temporarily deactivate it and sleep a little longer. It will reactivate automatically after 5 minutes. This can be repeated up to 5 times. When SNOOZE is on,

a box with SNZ appears next to the bell in the display.

AM/FM BROADCAST RECEPTION

Turn on the radio. Press the AM/FM button, AM or FM will appear on the top left of the display with the frequency to the right of it, in KHz for

AM and in MHz for FM. Press the buttons quickly to tune individual

frequencies, hold to tune automatically to the next frequency. Pull up the telescopic antenna to hear FM frequencies.

6

The AM ferrite bar antenna is built-in to the radio, so no telescopic antenna is needed for AM reception.

•FM tuning range: 87.5 to 108 MHz.

•AM tuning range: 520 to 1710 KHz.

USER MANUAL WEATHERTRACKERFR800

RECEPTION OF NOAA WEATHER FREQUENCIES

To hear your local weather station, pull up the antenna, turn on the radio and press the WB button at the top of the radio. Turn up the volume and

press the buttons to go through all 7 weather channels. WB and CH appear at the top of the display, with 1-7 next to CH. You’ll probably only hear one channel, but if you hear a weather broadcast on more than one, select the strongest. The strongest one will usually be your local weather station. Below are the frequencies that correspond to the radio’s channels:

7

RECEIVING WEATHER ALERTS

Tune to your local NOAA Weather frequency at a volume you wish to hear. Press the ALERT/WB button at the top of the radio. The ALERT light shines in the upper left corner of the radio. The audio will disappear, but the radio is still on, monitoring the NOAA Weather station until an alert appears. When it appears, you are alerted by a SIREN or a VOICE. Immediately press the WB button to hear the alert.