Eton G4000A operation manual SHORTWAVE RADIO OPERATION continued, Storing Stations Into Memory

G4000A OPERATION MANUAL

SHORTWAVE RADIO OPERATION continued

7 STORING STATIONS INTO MEMORY

MANUAL TUNING: Use the regular TUNING buttons to go up or down frequency. Be aware that when using manual tuning, it is possible to tune right out of the shortwave band you have entered. You are in the band as long as the band’s number, e.g. 25m, is in the display.

HOW TO CHOOSE THE BEST SHORTWAVE BAND TO TUNE AROUND IN

This information and much more can be found

in the section titled MORE INFORMATION ABOUT SHORTWAVE.

To store a station into memory, you must be tuned to that station. Then you must decide which of the 40 memories to store it into. Follow the easy steps outlined below.

HOW TO TELL WHICH MEMORIES ARE EMPTY

• To determine the next available memory, press

the FREE button once. The memory number

4.Immediately press the STORE button. If the display flashes, it means that a frequency is already stored into this memory. To overwrite it, immediately press STORE again. If you do not want to overwrite it, start over and use a different memory.

HOW TO ACCESS WHAT YOU HAVE STORED INTO MEMORY

SHORTWAVE BAND AUTO TUNING RANGES:

90m: 3200-3400 KHz	22m: 13600-13800 KHz
80m: 3500-3800 KHz	20m: 14000-14350 KHz
75m: 3900-4000 KHz	19m: 15100-15600 KHz
60m: 4750-5060 KHz	17m: 18065-18170 KHz
49m: 5950-6200 KHz	16m: 17550-17900 KHz
41m: 7100-7300 KHz	15m: 21000-21449 KHz
40m: 7000-7099 KHz	13m: 21450-21850 KHz
31m: 9500-9900 KHz	12m: 24890-24990 KHz
30m: 10100-10150 KHz	11m: 25650-26100 KHz
25m: 11650-12050 KHz	10m: 28000-29700 KHz

is shown in the lower right hand corner of the

display.

• To see all availably memories, press the FREE

button repeatedly. The empty memory numbers

are shown in the lower right corner of the display.

HOW TO STORE A FREQUENCY INTO MEMORY

There are 40 memories. Here is a specific example. To store BBC’s evening frequency to North America,

5975 kilohertz, into memory 32, do the following:

1.Press 5975

2.Immediately press the FREQU./METER button

3.Press 3 2

1.To access one specific memory, e.g. memory 25, press 2 5 then press either MEMO button

2.To review all filled memories, press either MEMO button repeatedly.

3.To scan filled memories, press either MEMO button for about one second, and then release it. Scan starts. To stop scan, press any button.

HOW TO ERASE THE CONTENTS OF A MEMORY

Enter the memory’s number e.g. 2 5 , then press FREE twice.

12 13