G4000A OPERATION MANUAL
8 USING THE CLOCK, ALARM AND SLEEP TIMER FEATURES
USING THE CLOCK, ALARM AND SLEEP TIMER FEATURES
continued
HOW TO SET THE CLOCK
This can be done with the radio on or off. The G4000A’s clock is a 24 hour clock only, e.g. 6’oclock in the morning will read as 6:00; 6 o’clock in the evening will read as 18:00. There are two clocks, TIME I and TIME II. Select one or the other by pressing the TIME 1/2 button. TIME I or TIME II shows in the display at top center. Set the time using the examples below.
EXAMPLE 1: If it is 06:00 hours press 6 . 0 0, then immediately press the TIME 1/2 button.
EXAMPLE 2: If it is 15:32 hours press 1 5 . 3 2, then immediately press the TIME 1/2 button.
HOW TO SET THE ALARM CLOCK
The alarm time is shown in the upper left corner of the display, under “ON TIME,” when the radio is off.
To set the alarm to activate at 6:30:
1.Press 6 . 3 0 (be sure to include the decimal point)
2.Immediatelypress and release the ON TIME button.
3.Select the alarm mode using the AUTO button.
HOW TO CONTROL THE ALARM CLOCK
•Press the AUTO button several times while looking at the upper left corner of the display.
•The “musical note” symbol wakes you to the radio playing the last station it was set to.
•The “bell” symbol wakes you to a beeper sound.
•When both symbols disappear and
THE ALARM IS DEACTIVATED.
HOW TO USE THE ALARM CLOCK’S SNOOZE FEATURE (button on top of radio)
Once the alarm has activated,you can get 5 minutes more sleep by briefly pressing the SNOOZE button. You can repeat this as many times as you like.
By pressing the SNOOZE button for more than
2 seconds, you can completely shut off the alarm.
HOW TO SET THE SLEEP TIMER
Press the SLEEP button over and over. Each press changes the amount of time the radio will play before shutting off automatically, 60 through 0
minutes.
HOW TO USE THE DIAL LIGHT (button on top of radio)
The LIGHT button causes the display to be illuminated. After 10 seconds, or when the LIGHT button is pressed again, the light will go out.
14 | 15 |
