Clean Dust Cup Filter
NOTE: Turn off the power switch and unplug the electrical cord to service.
Clean the dust cup filter as necessary.
1. Remove dust cup.
2.Pull dust cup filter out of dust cup.
3.Shake and brush the dust and dirt from filter.
4.If desired, launder the filter by hand in warm water using a mild detergent.
NOTE: The dust cup filter is not dishwasher safe. Do not put in diswasher.
5.Air dry thoroughly.
6.Replace filter in dust cup by pushing the seal located at the top in firmly to ensure proper filter performance.
Replace a dirty or torn filter. Order additional dust cup filters from The Eureka Company, Bloomington, IL 61701. Order dust cup filter, part number 61544. To place an order please telephone
Clean Brush Roll (on some models)
NOTE: Turn off the power switch and unplug the electrical cord to service.
The brush roll turns to sweep and comb the carpet nap. Keep the brush roll free from hair and threads so it will continue cleaning. When the bristles of the brush roll no longer touch a piece of cardboard held across the bottom plate, the brush roll is ineffective because the bristles no longer touch the carpet nap. To maintain the most effective cleaning, install a new brush roll.
8
