HOW TO ASSEMBLE (continued)
3Upper Cord Retaining Hook
4
Lower Cord
3 Retaining Hook
Hang Cleaner
3. Store Cord | 4. Store Unit |
Pull up on the electrical cord. Push cord into cord retainer inside upper cord hook. Wrap cord around upper and lower cord hooks. Fasten plug to electrical cord to prevent unwinding.
Use the hole in the handle to hang the cleaner for storage.
HOW TO USE
Power Switch
NOTE: On models without the brush roll in the nozzle, the power switch will have two positions, on and off.
1.Slide the power switch forward to turn on; slide backward to turn off.
2.Select type of cleaning. Carpet cleaning starts the brush roll turning. Bare floor cleaning stops the brush roll. NOTE: Some models do not have a brush roll.
Off
Floors
Carpets
Nozzle with Edge Kleener®
The nozzle turns down for regular or low profile cleaning. Airflow under the nozzle automatically directs suction to the edges and corners for maximum full width cleaning.
Dual Uses
To operate as a hand vac remove the handle by releasing the lock 
button.
To operate as a stick vac attach the upper handle.
Lock
Button
6
