Eureka 200 Series How To Maintain, Empty Dust Container, Push latch down. Pull out dust container

Models: 200 Series

1 12
Download 12 pages 49.91 Kb
Page 7
Image 7
HOW TO MAINTAIN

HOW TO MAINTAIN

Routine maintenance helps avoid unnecessary service calls. Be sure to empty dust container and clean motor filter after each use to keep vacuum cleaner operating efficiently. The filter must be securely attached before using. Failure to replace filter will allow dust to enter motor section which will damage the vacuum cleaner.

Empty Dust Container

NOTE: Unplug electrical cord and turn off power switch before servicing. Never operate vacuum cleaner without dust container.

. Empty Dust Container

Push latch down. Pull out dust container.

Remove motor filter from dust container and empty contents.

Filter

Dust

Push latch down. Pull out dust container. Container

Latch

Align and push motor filter into top of dust container. Be sure motor filter is inside container and seated on the ribs.

Position tab on bottom of dust container into slot; push down on container until latch securely snaps shut.

7

Page 7
Image 7
Eureka 200 Series warranty How To Maintain, Empty Dust Container, Push latch down. Pull out dust container