UPHOLSTERY AND STAIR CLEANING: Before You Begin
Fabric Code Ratings:
•W for wet clean.
•
•S for
B. Check the stuffing material if possible
Look inside the cushions or on the underneath side. If filling is a dark color, it may bleed through and discolor the fabric. Most stuffing material that is white to light yellow is colorfast and will not bleed colors through to the fabric covering.
A. Vacuum Upholstery or Stairs
Vacuum upholstery and stairs with a vacuum cleanerʼs attachment tool. Use a crevice tool for hard to reach areas such as tufts and corners.
IMPORTANT: Cleaning some upholstery fabrics with a wet cleaning solution may damage the fabric. Know what the fabric content is and how to clean it before using a cleaning solution on upholstery fabrics.
Most manufacturers care code their fabrics with cleaning methods. Some very delicate and unusual fabrics are DRY CLEAN ONLY. If in doubt of the fabric type, call a dealer or take a cushion or arm cover to a dealer for advice.
CAUTION: Be extra careful when cleaning on stairs.
C. Test clean a hidden area
Be sure to test clean a hidden area several hours before starting to clean. Let the test area dry completely. Inspect for changes in color, bleeding, stretching, or shrinking. Test another area if in doubt.
D. Pretest for Color Fastness
Before cleaning the upholstery, we recommend testing it for color fastness. Moisten a white towel with the cleaning solution. Test a small area of the cushion back. Gently rub the cloth over the area. Check each area for color bleeding. If the towel does not pick up any color, it should be safe to use the cleaning solution on the entire area.
To prevent the carpet shampooer/extractor from falling, do not place the unit on stairs. It is suggested that the carpet shampooer/extractor be placed at floor level to clean the lower portion of the stairs and be securely placed at the top of the stairway to clean the upper portion of the stairs.
A.Lift up the hose inlet cover.
B.Slide the accessory hose into the slot until it clicks into place.
C. Attach the upholstery brush to the end of the hose.
Attachment
Release
Solution Upholstery
Trigger Brush
Hose Inlet Plug
Turbo
Upholstery Brush (On some models)
9