OptiHEAT™ Heat Retention System (Available on Some Models Only)
IMPORTANT: Fill clean water tank with hot tap water. Do not use boiling water.
Why is heated cleaning better?
Testing has shown that cleaning with hot tap water at the normal household temperature (110º to 120º) actually cleans better than cold water or water at room temperature. Using water at temperatures above the normal level does not significantly increase cleaning ability.
What is OptiHEAT™?
Eureka's exclusive OptiHEAT™, Heat Retention System, maintains the temperature of the clean water so you are always cleaning at the optimal temperature. The unique OptiHEAT™ tank system is designed to keep hot tap water within the optimal temperature zone for a normal period of use.
STEP
1
SET UP
IMPORTANT: For best results, begin with a clean surface by vacuuming surface or item before using the extractor.
NOTE: Familiarize yourself with the parts of the extractor by reading this ownerʼs manual before using.
A. Fill Shampoo Bottle
If handle is folded, lift handle to operating position.
1)Lift up and pull out the shampoo bottle, fill with Eureka Carpet & Upholstery Concentrate only.
2)Close cap tightly, and replace shampoo bottle.
3)Gently push until the shampoo bottle snaps into place.
Shampoo
Bottle
B.Fill Clean Water Tank
1)Lift up and pull out clean water tank.
2)Fill tank to the designated fill line with hot tap water (not boiling), replace cap.
3)Gently push until the clean water tank snaps back into position.
Cap
Clean
Water
Tank
NOTE: When moving the extractor from one location to another, always make sure the recovery and clean water solution tanks are completely empty. Then tilt the unit slightly backward and roll on rear wheels, fold the looped handle and use the carrying handle for transporting up and down stairs.
5
