Eureka 3281 How to Identify Parts of Vacuum Cleaner, Maintenance Schedule, Brush Roll, EXT-U Belt

How to Identify Parts of Vacuum Cleaner

	Handle
	Turbo nozzle
	Power switch
Hose	Filter, cover and screen
	(located inside dust cup)
	Dust cup
	Nested crevice tool
	& extension wand
Headlight	HEPA filter compartment
	Height adjustment knob
	Brush roll cover

SPECIAL FEATURES

Available on some models

Turbo nozzle clip

Turbo nozzle

Handle release

Cord retainer Handle height adjustment

Carrying handle

Quick release cord wrap

Power cord

Dusting brush

Lower cord wrap

Hose retainer

Maintenance Schedule

Maintenance Schedule is also located on back side of dust cup.

!READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.

DUST CUP – Empty after each use

Filter cover

Filter

DCF21

Screen

HEPA filter

HF7

Press lever to release bottom lid.	Close bottom lid
Debris will empty.	until it clicks.

FILTER DCF21 – Clean or replace regularly, to maintain suction

		Brush debris from filter,
Empty cup. Pull back	Pull out filter cover,	cover and screen. Wash and
latch to lift off lid.	filter and screen.	dry thoroughly, as needed.

Rinse dust cup;	Reinstall screen,	Align lid at front; press down
dry thoroughly.	filter and cover.	until lid snaps into place.

HEPA FILTER HF7 – Replace within 6 months

Lay cleaner flat, grasp cover and pull off. Lift out filter and replace.

Brush Roll		BRUSH ROLL – Clean monthly
	EXT-U Belt	EXT-U BELT – Replace worn, cut or out of shape belt

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com