Eureka 3680, 3670 manual HOW to USE, To Clean Bare Floors and Rugs, To Use Blower Port

●K

FIG. 6

●L

FIG. 7

●M

FIG. 8

●J

●A ●B

10 FIG. 9

ENGLISH

HOW TO USE

CAUTION: Do not plug in cleaner until you understand all controls and features.

To Clean Bare Floors and Rugs

Step 1: Attach wands to hose handle.

Step 2: Place floor tool on end of wand.

Step 3: For models with telescopic wands, extend wands by pushing lock button down and pulling on lower wand until reaching desired height (Fig. 6).

Step 4: ●Adjust to maximum suction by closing the slip ring on the hose handle (Fig●. 6).

Step 5: Rotate swivel cord hook on bottom of canister to release cord (Fig. 7).

	●
Step 6: Plug cord into appropriate outlet.
Step 7: Push on/off switch	. Press once to turn on.

Press again to turn off (Fig. 8).

To Clean Stairs, Upholstery and Window Treatments

(see pages 6-7 for accessory details)

Step 1: Attach combination tool, crevice tool or turbo nozzle (on some models only) to the end of the hose. If additional reach is needed place wand on hose handle first.

Step 2: Adjust● to minimum suction by opening the slip ring on the hose handle (Fig●. 6).

Step 3: Rotate swivel cord hook on bottom of canister to release cord (Fig. 7).

	●
Step 4: Plug cord into an appropriate outlet.
Step 5: Push on/off switch	. Press once to turn on.

Press again to turn off (Fig. 8).

To Use Blower Port

Step 1: Remove HEPA filter (on some models only). See

pages 14-15 ●for details.●

Step 2: Detach hose from front●of canister and attach to the blower port on the back side of the canister (Fig. 9). ●

Step 3: Rotate swivel cord hook on bottom of canister to release cord (Fig. 7).

Step 4: Plug cord into appropriate● outlet.

Step 5: Push on/off switch . Press once to turn on. Press again to turn off (Fig. 8).