Eureka 3680, 3670 To Replace Hepa Filter on some models, To Re-install Hepa Filter on some models

ENGLISH

To Replace HEPA Filter (on some models)

Step 1: Grasp the bottom clips ●on the filter ● (Fig. 13).

Step 2: Pull out and down to release (Fig. 13).

I
●		Replace with	filter, part number 60666.
		To Re-install HEPA Filter (on some models)
		Check the HEPA filter ● with each disposable dust bag
		change. Replace twice a year or after every six bag
		changes as needed.
O		Step 1: Insert upper filter corner tabs ● firmly under
●
		rear housing tabs ●	(Fig. 14).
		Step 2: Pivot filter ● down until bottom clips ●on filter
	FIG. 13
		click securely into place on the cleaner (Fig. 14).

●	To Clean the Motor Filter
P
●	CAUTION: Turn off vacuum and unplug the
	electrical cord before cleaning the motor
I	filter. Never operate the vacuum cleaner
	without the motor filter in place.

●Q

●O

O

●

Step 1: Remove the●dust bag. See pages 12-13 for details.

Step 2: Grasp filter and pull out to remove (Fig. 15).

Step 3: Rinse under warm water.

Step 4: When all parts are completely dry, replace filter and disposable dust bag (see pages 12-13 for more details).

FIG. 14

●R

14 FIG. 15