PROBLEM SOLVING
NOTE: Turn OFF the power switch and unplug the electrical cord before servicing.
PROBLEM |
| CAUSE | SOLUTION | |
|
|
|
| |
Motor won’t start | 3 | Electric plug | Push plug securely into | |
|
|
| outlet. | |
|
|
| Try another outlet. | |
|
|
| Check circuit breaker. | |
| 3 | Power switch not | Make sure power switch is | |
|
| turned “ON” | “ON.” | |
|
|
|
| |
No suction at end of | 3 | Full dust cup | Empty dust cup. | |
hose | 3 | Hose | Remove any clogs from | |
|
|
| hose that restrict airflow, | |
|
|
| then try again. | |
| 3 | Clogged or dirty | Check filter. If dirty, clean or | |
|
| filter. | replace with a new filter. | |
| 3 | Canister lid not | Push canister lid until it | |
| latches firmly. | |||
|
| latched | ||
|
|
| ||
|
|
|
| |
Reduced suction | 3 | Full dust cup | Empty dust cup. | |
Rotate slip ring on wand | ||||
| 3 | Slip ring open | ||
| until hole is covered. | |||
|
|
| ||
| 3 | Hose | Remove any clogs from | |
| hose that restrict airflow, | |||
|
|
| ||
|
|
| then try again. | |
| 3 | Clogged or dirty | Check filter. If dirty, clean or | |
|
| filter. | replace with a new filter. | |
|
|
| ||
Cleaner shuts off | 3 | Internal safety | Unplug cleaner and check | |
|
| thermostat trips | for obstructions in hose, | |
|
|
| ||
|
|
| wands and attachments. | |
|
|
| Check for full dust cup. | |
|
|
|
| |
General questions | 3 | Assembly or | Call | |
|
| related | between 7:00 | |
|
| attachments | ||
|
| central standard time. | ||
|
|
| ||
|
|
| Know the Model number | |
|
|
| and Serial number when | |
|
|
| you call. | |
|
|
|
|
10
