Eureka 3690 How to Clean or Replace Motor Filter, How to Install HEPA Filter on some models

Models: 3690

1 12
Download 12 pages 42.71 Kb
Page 9
Image 9
How to Clean or Replace Motor Filter
3 Lift dust cup out of canister by handle.
Handle

How to Clean or Replace Motor Filter

1Turn off and unplug cleaner.

2Open lid by pushing down hood latch and lifting up on lid.

4Locate motor filter in bottom of canister body and lift out.

5Clean motor filter by rinsing under warm water and let air dry if heavily soiled.

6Reinstall completely dry motor filter before use.

How to Install HEPA Filter (on some models)

Check the HEPA filter each time the dust cup is emptied. Replace twice a year or as needed.

Upper Filter Tabs

Rear Housing Tabs

Bottom Clips

Bottom Clips

Insert upper filter corner tabs firmly under rear housing tabs and pivot filter down until bottom clips on filter click securely into place on the cleaner.

How to Remove HEPA Filter

Grasp the bottom clips on the filter and pull out and down to release the upper filter tabs from the rear housing tabs on the cleaner.

9

Page 9
Image 9
Eureka 3690 How to Clean or Replace Motor Filter, How to Install HEPA Filter on some models, How to Remove HEPA Filter