HOW TO USE
Power Switch
The power switch has three positions. Off, Floor (hard surface cleaning) and Carpet.
Power Switch
Nozzle with Edge Kleener®
Airflow under the nozzle automatically directs suction to the edges and corners for maximum full width cleaning.
Experiment with your hard floor surfaces, sometimes it is best to have brushroll turning. (Switch in the carpet position).
Dual Uses
Push the handle button to release lock. |
|
The handle will slide freely until it finds |
|
one of the two available handle |
|
positions. It automatically locks in either | Stair |
of these two positions. | Cleaning |
With the handle collapsed, the unit is | Handle |
great for stairs and compact storage. |
|
With the handle extended, the unit is |
|
great for floor cleaning. |
|
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. Keep the cleaner operating at top efficiency. Empty the dust cup after each use.
Empty Dust Cup
Hook
Latch
1.Pull dust cup latch up.
2.Swing dust cup out from body and up off the dust cup hook on the body.
3.Leaving dust cup filter in the dust cup, shake contents of dust cup into a waste container. If picking up lots of carpet fuzz or pet hair, remove filter. (To clean dust cup filter refer to dust cup filter section.)
4.To replace dust cup, fit dust cup down onto hook.
5.Swing down and push gently into body until dust cup clicks into place.
7
