81522 ZweitaOG.qxp:English 2/17/09 11:42 AM Page 3

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER

WARNING

Risk of injury to persons. Always turn off the handheld vacuum

before connecting it to the upright vacuum.

To reduce the risk of fire, electric shock, or injury:

Do not use outdoors or on wet surfaces.

!• Do not operate the vacuum cleaner or charger that has been damaged in any way. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a

service center.

To avoid excessive heat and damage to the unit or batteries, do not operate the vacuum cleaner while charging.

Do not allow to be used as a toy. Close attention is necessary when used by or near children.

Use only as described in this manual.

Use only the charger provided to recharge: Model CSD 1300150U-31 for 120 volts.

Do not pull or carry the charger by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.

Do not use extension cords or outlets with inadequate current-carrying capacity for the charger.

Do not unplug by pulling on cord. To unplug,grasp the charger, not the cord.

Do not handle charger or vacuum cleaner with wet hands.

DO NOT MUTILATE OR INCINERATE BATTERIES AS THEY WLL EXPLODE AT HIGH TEMPERATURES.

Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid gets on the skin (1) wash quickly with soap and water or (2) neutralize with a mild acid such as lemon juice or vinegar. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention.

The terminal on the vacuum cleaner should be kept free and clean of objects. While there is no shock hazard from the terminal, a burn could occur if metal objects are inserted into the terminal area.

This vacuum cleaner creates suction. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not use without a filter in place. When servicing the unit, never put fingers or other objects into the fan chamber in case the unit would accidentally be turned on.

Use extra care when cleaning stairs.

Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.

Use the charger indoors in a cool, dry area not exposed to the weather to avoid electrical shock and/or cleaner damage.

Keep your work area well lighted.

Unplug electrical appliances before vacuuming them.

Overcharging, short circuiting, reverse charging, mutilation or incineration of the cells and the batteries must be avoided to prevent one or more of the following occurrences: release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface temperature.

If a cell or a battery has leaked or vented, it should be replaced immediately using protective gloves.

If and when necessary, these cells or batteries must be replaced with identical new ones from the same manufacturer. If a cell or a battery to be replaced is connected with other cells or batteries in series, it is recommended that the other cells or batteries be replaced with new ones at the same time.

Reverse polarity installation of the cell or the battery in the end product must be avoided.

Do not incinerate this appliance even if it is severely damaged. The batteries can explode in a fire.

SAVE THESE INSTRUCTIONS

ENGLISH

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

1

Page 3
Image 3
Eureka 580 manual Important Safeguards

580 specifications

The Eureka 580 is a state-of-the-art piece of equipment designed to meet the demanding needs of various industries, especially in fields requiring top-notch productivity and efficiency. This machine represents the fusion of advanced engineering and cutting-edge technology, making it a valuable asset in any operational setting.

One of the standout features of the Eureka 580 is its high-performance engine, which provides robust power while maintaining impressive fuel efficiency. This engine is equipped with modern technologies that significantly reduce emissions, aligning with global sustainability goals. Its performance is complemented by a sophisticated transmission system, allowing for seamless gear shifting and optimal power delivery to handle any operational task.

The Eureka 580 boasts an ergonomic design that enhances user comfort and operational efficiency. The operator's cabin is spacious, featuring adjustable seating and intuitive controls, ensuring that users can operate the machine with ease and precision for extended periods. The visibility from the cockpit is excellent, thanks to large windows and strategically placed mirrors, minimizing blind spots and enhancing overall safety.

Another notable characteristic of the Eureka 580 is its advanced hydraulic system. This system ensures powerful and precise movement, making it capable of handling a wide variety of attachments and implements. This versatility allows the Eureka 580 to excel in different applications, from construction to agricultural tasks, proving its adaptability in diverse environments.

Moreover, the Eureka 580 is equipped with modern telematics technology, providing real-time data and insights on machine performance, maintenance needs, and location tracking. This feature allows operators to stay informed and proactive in managing their machinery, leading to decreased downtime and increased productivity.

Durability is another hallmark of the Eureka 580. Built with high-quality materials and subjected to rigorous testing, this machine is designed to withstand tough conditions and heavy workloads. Its robust frame and components ensure long-lasting reliability, reducing the frequency of repairs and enhancing the overall return on investment.

In summary, the Eureka 580 is an innovative machine that combines power, efficiency, and user-friendly design. With its advanced technologies, versatile capabilities, and durable build, it stands out as an ideal choice for industries seeking to improve productivity and operational efficiency while adhering to modern environmental standards.