Eureka 6850 warranty How to Assemble and Use, POWER-TOUCHHandle, Vacuum Control

How to Assemble and Use

POWER-TOUCH®Handle	ON
Remote ON/OFF Selector for bare floor or carpet
*Off – push down on front
Bare Floor – push down on back

*Power ON/OFF for canister can only be controlled by canister ON/OFF switch.

Vacuum Control

Cleaning suction is reduced by pushing lever to LOW position. Place lever at HIGH position to increase suction for carpet cleaning.

1.Snap interlocking wands together.

2.Push assembled wands into power nozzle.

3.Place Power-Touch hose handle into wands until plug connects and button locks.

4.Insert hose coupling into top of canister and push hose power cord into receptacle located on top of canister. The outlet has a protection side cover which must be moved slightly towards the rear of the cleaner before plug will go into the outlet. Make sure plug is fully seated in the outlet or the motorized power nozzle may not function.

5.Pull on electrical cord and push plug into outlet. To rewind, step on Cordaway cord reel button, hold and guide plug while it rewinds.

6.Step on handle release on the motorized nozzle to release handle; pull back to comfortable work position.

7.Push On/Off canister switch.

(A thermostat automatically shuts off the motor if it overheats, see Automatic Motor Shut-Off,)

8.Bare floor or carpet cleaning selection on remote control, only.

8

OFF

3

1

2

Select bare floor or carpet cleaning

Power-Touch

Hose Handle

Quick Release Foot Pedal (on some models)

4

7

6

Handle

Release

5

6