How to Assemble and Use
Remote ON/OFF Selector for bare floor or carpet | Carpet | Off | |
Carpet – push down on front | |||
| |||
|
| ||
*Off – middle |
| Bare | |
Bare Floor – push down on back |
| ||
|
|
*Power ON/OFF can be controlled on some models from the
Remote Speed Control (optional)
Slide to reduce or increase power as needed.
Vacuum Control
9Select bare floor or carpet cleaning
Floor
Hose Handle
Cleaning suction is reduced by pushing lever to LOW
position. Place lever at HIGH position to increase suction 3 for carpet cleaning.
Available on models without Remote Speed Control.
1. Push interlocking wands together.
2.Push assembled wands into power nozzle.
3.Place
4.Insert hose coupling into top of canister.
5.Push hose power cord into receptacle located near the canister handle.
6.Pull on electrical cord and push plug into outlet.To rewind, step on Cordaway cord reel button, hold and guide plug while it rewinds.
7. Step on handle release to release handle; pull back to comfortable work | 1 |
position. |
|
8.Push On/Off canister switch.
(A thermostat automatically shuts off the motor if it overheats, see Automatic Motor
9.Bare floor or carpet cleaning selection on remote control, only.
10.Variable Speed Control on the canister slides to increase or decrease power as needed.
6 | 2 |
NOTE: Optional remote controls on the hose handle operate only if the canister switch is on.
Quick Release
Foot Pedal
7 Handle
Release
10
4
5
8
The Quick Release foot pedal allows the user to easily remove the motorized power nozzle for above the floor cleaning.
To disconnect power nozzle, step down on the rear of the quick release foot pedal and pull up on wands.
7