Eureka 6900 How to Assemble and Use, POWER-TOUCH Handle, Vacuum Control, Hose Handle, Detail A

How to Assemble and Use

POWER-TOUCH®Handle

Remote ON/OFF Selector for bare floor or carpet *Off – push down on front

Bare Floor – push down on back

*Power ON/OFF can be controlled on some models from the POWER-TOUCH handle switch or canister ON/OFF switch. Other models can only use the canister switch.

9

ON OFF k

Select bare floor or carpet cleaning

Power-Touch

Vacuum Control

Cleaning suction is reduced by pushing lever to LOW position. Place lever at HIGH position to increase suction for carpet cleaning.

Available on models without

Remote Speed Control.

1.Snap interlocking wands together.

2.Push assembled wands into power nozzle.

3.Push motorized nozzle plug into the retainer located at the top of the upper wand; secure cord in slot (Detail A).

4.Place Power-Touch hose handle into wands until plug connects and button locks.

5.Insert hose coupling into top of canister and push hose power cord into receptacle located near the canister handle.

6.Pull on electrical cord and push plug into outlet. To rewind, step on Cordaway cord reel button, hold and guide plug while it rewinds.

7.Step on motorized nozzle to release handle; pull back to comfortable work position.

8.Push On/Off canister switch.

(A thermostat automatically shuts off the motor if it overheats, see Automatic Motor Shut-Off,)

9.Bare floor or carpet cleaning selection on remote control, only.

NOTE: Optional remote controls on the hose handle operate only if the canister switch is on.

8

5

6

k

Hose Handle

4

3

Detail A

1

2		7
	k	Handle Release

s

6