Eureka 6900 warranty Remote Speed Control optional, How to Assemble and Use, POWER-TOUCH Handle

How to Assemble and Use

POWER-TOUCH®Handle

Remote ON/OFF Selector for bare floor or carpet Carpet –push down on front

*Off – middle

Bare Floor – push down on back

*Power ON/OFF can be controlled on some models from the POWER-TOUCH handle switch or canister ON/OFF switch. Other models can only use the canister switch.

Remote Speed Control (optional)

Regardless of the speed of the canister motor, slide to reduce or increase power as needed.

Vacuum Control

Cleaning suction is reduced by pushing lever to LOW position. Place lever at HIGH position to increase suction for carpet cleaning.

Available on models without Remote

Speed Control.

1.Push interlocking wands together.

2.Push assembled wands into power nozzle.

3.Place Power-Touch hose handle into wands until plug connects and button locks.

4.Insert hose coupling into top of canister.

5.Push hose power cord into receptacle located near the canister handle.

6.Pull on electrical cord and push plug into outlet. To rewind, step on Cordaway cord reel button, hold and guide plug while it rewinds.

7.Step on motorized nozzle to release handle; pull back to comfortable work position.

8.Push On/Off canister switch.

(A thermostat automatically shuts off the motor if it overheats, see Automatic Motor Shut-Off,)

9.Bare floor or carpet cleaning selection on remote control, only.

10.Variable Speed Control on the canister slides to increase or decrease power as needed.

NOTE: Optional remote controls on the hose handle operate only if the canister switch is on.

4	10
	8
5

9

Carpet	Off	Floor
	Bare	k

n

3

n

1

2

Select bare floor or carpet cleaning

k	Power-Touch
	Hose Handle

7

Handle

Release

s6

7