Charge the Battery Pack

NOTE: Charge the cleaner for 10-12 hours before initial use. The batteries of a new cleaner are on a low charge.

1 . Slide the cleaner up to snap it into the wall bracket.

2.Plug the charger into an electrical outlet.

It is all right to leave the cleaner on continuous charge so it is always ready to use. Unplug only if it will not be in use for several weeks at a time.

HOW TO USE

1.

Push and hold the power switch

ON

OFF

 

forward to turn on.

 

 

 

2.

Release the switch. The cleaner

 

 

 

automatically turns off to save power

 

 

 

when it is not in use.

 

 

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to routine maintenance. Keep the cleaner operating at top efficiency. Empty the dust cup and clean the filter after each use.

Empty Dust Cup

1.Push down on dust cup latch.

2.Pull dust cup from handle section.

3.Shake contents into a waste container.

4.Clean motor filter (refer to motor filter section).

5.Press dust cup onto handle section until they snap together.

1

2

6