HOW TO USE
CAUTION: Never leave plugged in cleaner unattended.
An upright vacuum cleaner will clean any type of carpet. Use the attachments to clean upholstery or bare floors. When using attachment tools, place the handle in the upright position. Do not place cleaner on furniture or steps as the brush roll may cause damage.
2
Cord
Clip
3
HOW TO USE
1
5
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body away from any moving part (such as the revolving brush). Turn off the switch and unplug the cleaner before changing the cleaner height setting.
The front of the cleaner has an adjustment that raises or lowers the cleaner base to match the type of carpet. With the cleaner cord unplugged, set the adjustment to lowest setting for maximum cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brush roll must reach the carpet for effective cleaning.
1
1.Adjust cleaner height setting to lowest position for maximum cleaning. Adjust to a higher setting to make pushing easier. For easy adjustment, tilt the cleaner back to move setting knob.
2.Place electrical cord out of the way on the cord clip while vacuuming or storing.
3.Plug electrical cord into outlet.
Store or
Use Attachments
Operate |
HandleClean
ReleaseUnder
4
Make each adjustment with cleaner switch off and cord disconnected from outlet. For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels.
4.Step on handle release. Pull handle back to a comfortable position.
5.Push On or Off power switch.
6
